|
|
| |
|
 |
| .
Component marking |
| .
Cable and wire marking |
| .
Electrical Marking |
| |
Technical
specifications
|
| |
POLYESTER |
|
| |
|
|
| |
Temperature |
-40°C to +150°C |
| |
Thickness |
0.05mm, 0.08mm, 0.09mm, 0.10mm, and 0.11mm |
| |
Adhesive |
Permanent Acrylic |
| |
Resistance |
Water, Oil, and Alcohol |
| |
Area
of use |
Out Door |
| |
Printing
method |
Laser, Dot Matrix, Thermal Transfer |
| |
|
|
| |
VINYL ( PVC ) |
|
| |
|
|
| |
Temperature |
-29°C to +80°C, -40°C to +70°C
-40°C to 100°C, -40°C to +110°C |
| |
Thickness |
0.10mm, 0.11mm, 0.13mm, and 0.20mm |
| |
Adhesive |
Permanent Acrylic |
| |
Resistance |
Water, Oil, and Alcohol |
| |
Area
of use |
In Door |
| |
Printing
method |
Thermal Transfer |
| |
|
|
| |
ACRYLIC |
|
| |
|
|
| |
Temperature |
-29°C to +80°C, -40°C to +175°C |
| |
Thickness |
0.10mm, 0.15mm, and 0.18mm |
| |
Adhesive |
Permanent Acrylic |
| |
Resistance |
Water and Moisture |
| |
Area
of use |
In door |
| |
Printing
method |
Dot Matrix, and Marking Pen |
| |
|
|
| |
POLYPROPYLENE |
|
| |
|
|
| |
Temperature |
-25°C to +80°C |
| |
Thickness |
0.09mm |
| |
Adhesive |
Permanent Acrylic |
| |
Resistance |
Water and Chemicals |
| |
Area
of use |
In door |
| |
Printing
method |
Thermal Transfer |
| |
|
|
| |
POLYETHYLENE |
|
| |
|
|
| |
Temperature |
-25°C to +80°C |
| |
Thickness |
0.13mm |
| |
Adhesive |
Permanent Acrylic |
| |
Resistance |
Water and Chemicals |
| |
Area
of use |
In door |
| |
Printing
method |
Thermal Transfer |
| |
|
|
| |
PAPER |
|
| |
|
|
| |
Temperature |
-25°C to +80°C |
| |
Thickness |
0.10mm, 0.11mm, and 0.16mm |
| |
Adhesive |
Permanent Acrylic |
| |
Resistance |
Moisture |
| |
Area
of use |
In door |
| |
Printing
method |
Marking Pen, Laser, Inkjet printers and Thermal Transfer |
| |
|
|
| |
|
|
| |
|
|
| |
NON
ADHESIVE MARKERS |
| |
|
|
| |
SINGLE
CHARACTER MARKERS (CLOSED TYPE ) |
|
| |
These single character markers are available
in the size ranging from 0.2 sq mm (1.0mm ø ) to 70 sq mm (16.0 mm
ø ). These markers are to be inserted individually as per your required
sequence on to the wire/cable before crimping or terminating the wire/cable. |
 |
| |
Advantages
This can be arranged/inserted on to the
wire /cable as per your required sequence.
Please note that these markers are also available in halogen free material
as per UL94-VO |
| |
|
|
| |
SINGLE
CHARACTER MARKERS (OPEN/PRESS FIT TYPE )
|
|
| |
These open / press type markers are perfect when it comes to re-marking
or marking of wires that are already terminated. Due to the hardness of
the marker, be ensured that the marker remains in place.
|
|
| |
WE
CAN OFFER YOU THE BEST IDENTIFICATION AND MARKING SOLUTIONS ONLY AFTER WE
UNDERSTAND YOUR REQUIREMENT.
Please
contact us on
info@panelsols.com
for further information. |
| |
|
|
| |
READY
TO USE, MADE BY US TO
YOUR REQUIREMENT |
| |
As the heading suggests, we can offer you the
markers in closed and open type as per your requirement. These markers are
pre printed as per your requirement there by saving the time in the production
line. |
 |
| |
EXAMPLE :
If you use single character markers and the sequence is of
11 legends and the wiremen has to insert/press fit the single character markers one after the other as given in the wiring table, but if you adopt READY TO USE markers the wiremen has to insert / pressfit a single marker which contains all the required 11 legends.
These types of "READY TO USE" markers are available in both
closed and open/press fit against order in a very short notice.
WE CAN
OFFER YOU THE BEST IDENTIFICATION AND MARKING SOLUTIONS ONLY AFTER WE
UNDERSTAND YOUR REQUIREMENT.
Please
contact us on
info@panelsols.com
for further information.
|
| |
|
|
| |
MAKE
IT YOURSELF |
|
| |
These markers are very convenient to the user
and the marker can be produced on site and on demand.
These markers are very time saving there by avoiding the loss in man hours
without waiting for the regular markers from your nearest electrical stores. |
These make it yourself markers need no extara infrastructure
other than your PC and a printer on your desk. |
| |
WE
CAN OFFER YOU THE BEST IDENTIFICATION AND MARKING SOLUTIONS ONLY AFTER WE
UNDERSTAND YOUR REQUIREMENT.
Please
contact us on
info@panelsols.com
for further information. |
| |
|
|
| |
STAINLESS
STEEL MARKERS FOR WIRES AND CABLES |
|
| |
These can be used to mark your cables when buried,
corrosive, and in hazardous environment.
Available with stainless steel cable tie on request. |
 |
| |
|
|
| |
|
|
| |
JUNCTION
BOX AND ENCLOSURE MARKERS |
| |
|
|
| |
Thse markers consist of two types.
a) Basic profile is available with adhesive and without adhesive on request.
This basic profile can be mounted on your junction box by sticking or riveting. |
 |
| |
b) This marker is available in transparent
and open versions which can be pre-shifted on the basic profile as and when
required.
WE CAN OFFER
YOU THE BEST IDENTIFICATION AND MARKING SOLUTIONS ONLY AFTER WE UNDERSTAND
YOUR REQUIREMENT.
Please
contact us on
info@panelsols.com
for further information. |
| |
|
|
| |
HEAT SHRINKABLE MARKING SOLUTIONS |
| |
These markers are made of polyolefin
material in different colours and sizes. These heat shrinkable markers are available
in different shrinking ratios like 2:1, 3:1, and 4:1
Halogen free heat shrinkable markers are also available.
These markers are available in two forms
a) Ladder form
b) Tube form
Both the above forms can be supplied either empty ( unprinted ) or printed
as per your requirement which are ready to use on your wires/cables.
Please contact
us on
info@panelsols.com
for further information. |
| |
|
|
